Has anybody ever used this ??

[Tunedperformance]

Thanks again 1project2many, ebay it will go

[1project2many]

I'll be watching. If you get decent money I might sell mine.

[Tunedperformance]

I will not be able to list it until the middle of next week any description will be greatly appreciated.

[EagleMark]

For sale: Really cool Paper Weight for Tuner! Best offer...

[Tunedperformance]

Not really what I had in mind EagleMark, I will trade it here for a Jim stim

[EagleMark]

Sorry I had to... JimStim are OK but the adjustments are touchy, hard to get an even sweep on anything, jumpy, have to wire in an EST too. I was wondering if the one Moates has for Hondas would be better? Wish we could get those GM boards built again.

I get way better results with an intake manifold with everything on it, distributor down side of bench with varible speed drill clamped on shaft, vacuum pump for MAP, ECM and harness with relays, CEL, O2 fuel pump and knock sensor mounted to wall, small garden tractor batterey under bench with small charger and Pos and Neg posts on bench. Can test any sensor, ECM, chip etc... ALDL port is over to my desktop PC, but then again I use it to build harness's too.

[Tunedperformance]

That does sound like a ideal setup maybe ditch the lawn and garden battery for pc power supply. Im so limited in garage space. Some day I will get my shop up at our vacation home ;). You think if people keep posting the boards can be made again. I wish I wouldn't of missed out. Maybe I should find his email. I have a kinda rare paper weight for tuner's up for trade. lol

[1project2many]

That device was supposed to work with the pocket programmer. You would load the program to it through the burner but I do not know if you could load partial programs or not. And I don't know what the erase protocol was. Part of my problem may have been my pocket programmer. It's an early version and may not have been compatible. There's also a mention by the mfgr on the thirdgen board that there was a hardware problem with one version of the emulator but it had been fixed in software, but the old hardware couldn't run new software and vice versa.

I may have some documentation around somewhere. I may also have some software. I looked in the gmecm archives and it looks like I would have purchased mine around July or August of 2000 so finding all the "stuff" may not happen overnight.

Maybe send a note to transtronics asking for a manual and softwarefor your version.

[Tunedperformance]

updated email back from intronics. I think they misunderstood what I have. I emailed them back with a picture of the rom emulator. I can't view the exe file on dialup on a mac so I will look at it in a few days.

There is a readme file that gets installed with the romulator software - see

PKT_ROM1.44

on http://xtronics.com/memory/updates.html

am kinda confused I
> purchased this for my gm ecm and the board has a 32 pin header do I need
> a adapter to use it as a 28 pin and what is the size of the rom emulator
> is 512K ??

Depends on if you have the romulator 1 (256K ) or romulator 2 ( 512K )

I'm thinking you might have a memcal? http://syclone.invisibill.net/memcal1.jpg

There are memcal adapters available here:
http://www.engpwrsys.com/index.php?a...d&productId=60

[Tunedperformance]

Not sure how to respond to this? so does the 28 pin ribbon attach to a g1? and what do you program this rom emulator as. I guess the people who sold it don't know either. Just a bogus product?


> Hi karl, now Im really confused I will look at the file. The moates hdr1
> is for reading a memcal? I am using a memcal and have one of those. But
> how do you connect a male to a male on the pins? -Brian

?? The mail pins of the memcal adapter plug into the socket on the programmer.

There is a second version that has a socket for the romulator:

http://www.moates.net/documentation....mentation_id=9



>
> http://i43.photobucket.com/albums/e3...s/IMG_0437.jpg
>

[EagleMark]

I read all that and looked at your emulater (paper weight) and it dosen't have any pins so it's female? I don't understand any of it,,,

Now your asking a company for tech support on a product they have not sold since 2000... when I needed tech support on the newest pocket programmer that just came out in 2006ish they could not help with it either.

Their UV eraser has worked flawless and has never needed tech support! Maybe ask them for latest software vesion update for the UV eraser and see what they say?

[Tunedperformance]

Eaglemark, Its 28 pin male on the ribbon and 32 pin male on the board. So at first he tells me to install it to a hdr1. Two males that's gay !! Then after I explain to him that will not work he tells me to use the g1. ok but does the 32 go onto the g1, or does the 32 go to a programer and I do not see how the 28 pin is indexed. I don't want to let the smoke out of the paper weight. Now I remember why I never fooled with this when I bought it. I think its a 512K but who know's maybe well wishful thinking the .exe will say anything. George at intronics has no people skills I will never call that guy again.