Set the EGR "ON" minimum temperature to MAX (151c) to disable the EGR. Turn off error code 32 to prevent the Service Engine Soon from coming on for an EGR error. Sometimes a beginning chip programmer thinks turning off error code 32 only is the only programming needed disable the EGR. Some experienced chip programmers will use a "Belt & Suspenders" method to disable the EGR and also set the minimum speed to enable EGR to MAX (255 mph).

If the engine was rebuilt stock and the only engine modification was removing the EGR, the stock chip programmed with the EGR disabled will work.

If there are other engine modifications, please list them in this tread. Modifications like Injector Upgrades, Exhaust Upgrades, and Performance Camshaft.

dave w