Free LS1 Tuning Software (all you need is TunerPro)

[LRT]

....

[sturgillbd]

Thank you for the explanation. I had read the comments and the text is almost identical to what EFILive and even had the same formulas. I did a base install of EFILive just to compare the calibrations. I didn't set any preferences on how to display the VE. There is a learning curve coming from OBD1 and flashing chips to working with the LS calibrations. I apologize for any inconvenience

[yoheer]

hi guys
1. trying to add plugins to tunerpro. Doing all by instruction. wanna add 512 and 1mb checksum plugins. they doesn't appear in help->plugins. what i'm doing wrong?
2. I have one pcm 12583659 (serv.#12586243) It is from 2005 car. It seem that I can use 12587603.xdf and 2004 bin files for it. Right?
3. What xdf should I use with 2007 4.8 engine? I'll specify PCM# a lil bit later
4. Is it possible to change operating system?

[B52Bombardier1]

Hello,

1 - I placed my checksum plugins inside the C:\Program Files (x86)\Tuner Pro RT folder. Seems to work, no problems.

2 - If your PCM's have the green / blue connectors and a 1 megabyte memory capacity, they should work.

3 - The XDF file MUST ALWAYS MATCH the operating system, NOT the model year or engine size.

4 - Most of the time, you are changing the operating system. Completely overwriting your previous OS. This is because most of us are not lucky enough to have a vehicle with an original OS that has a supporting XDF file. We most always abandon our original OS and put in an OS that has good XDF support. The 12587603 OS is such a thing.

Rick

[yoheer]

If I have 1mbyte pcm with green/blue socken and any part number then I can use 2004 OS 12587603. Right?
And the same stuff with 512k pcms?
One more question:
Is it possible to disable electronic Throttle body? Install oldschool cable-type TB and tune the pcm?

[B52Bombardier1]

You can only support drive-by-cable throttling with the following PCM's. They made P59's (1 megabyte devices) with the IAC hardware (drive by cable) up to 2007. But only in hardware (not service) numbers: 12575502, 12570558, 12583659, and 12589161. Any other 1 megabyte PCM won't do it.

Same advice applies in the red/blue P01 PCM devices. You must use mated and matched XDF files with your OS.

Rick

[yoheer]

Thank you Rick
I placed plugins(github) to tunerpro directory and duplicated to documents/tunerpro files/plugins
No result
There is only 2 plugins which present since installation. No new one
Is there any manual how to disable TB?