Free LS1 Tuning Software (all you need is TunerPro)

[sturgillbd]

I have a couple of questions regarding this xdf and the one for the 512k pcms. I noticed when viewing the VE table using this xdf file in Tuner Pro, The VE numbers range from around 1 to a little over 2. When I open the same bin file using EFI Live, There are normal VE numbers as in VE %. The conversion is approximately 48.212 * the number reported in TunerPro. I also get an out of range value when I set VATS to be disabled in Tuner Pro and open the bin in EFILive. I have an 03 GMC Sierra with a 4.8 with 4L60E. I segment swapped a 04 4.8 engine cal into an 04 5.3 bin from the same type truck and programmed a second PCM. I used EFILive to get the 03 calibration parameters such as MAF calibration and the injector data and pasted that data into the 12587603 flashed PCM. It runs fine but just playing around I noticed these differences. I am attaching screenshots of the things I see.

Maybe LRT will see this post. If anyone else knows, please chime in.

Thanks,
Brian