And what about standard hardware? Like elm327, or galetto or kess. Diablosport is too expensive
There is enough info in this thread to give you a good starting point. If you search my profile and look for my posts, you will see I have asked very few questions. Participated in very few. That is because almost all the information I needed to do what I wanted to do was available to find in the forums, I just had to search for it. This is also not the only place to find info. Google is your friend. You will find most people on these forums have answered the same questions over and over again, and will ignore you if you seem to have asked questions without searching for it.
Again, Thanks. I checked out LSDROID and a guy by the name of Pocono Joe said I should seg.swap the team/trans dia. & speedometer files. Darn, I should of ask how to? Any good you tube videos!? I will look on Google as well. Thanks.
If you have your original OS, and have found a bin of the SAME OS with with the segments you are looking for, you can open lsdroid and go to the segment swap section of the app if you have already unlocked that feature. If you look through Pete's post on the FB page, he explains the reason behind the feature locks and how to enable the features. If you try to swap segments from an OS that isn't compatible, lsdroid is supposed to recognize it and not allow it I think, but I would make sure you use a matching OS and not chance that. The segment swap feature is actually pretty easy to use, just pay attention and make sure you make the names of the bins you get something you will know what they are and not get them confused and flash the wrong one.
Good Luck!
GREAT INFO!!! Thanks!!
Bookmarks