Need help tuning my calibration on a 0411 with road runner emulator using TunerCat.

[Aksl]

Aksl, im NISANDA the one that send you the file, and its from a Silverado 2001 with the 5.7 vortec not a Express Van, in mexico there made 5.7s with the gen3 411 PCMs.

The file i send you its all parameters Stock (air,fuel,timming etc) except for Vats delete, Rear 02, EGR, EVAP,Cats and air pump delete. (the basic for start up swap).

This file i attach its basically the same but with idle adjustment to get you closer to you cam, some timming added and some more parameters adjusted to get you closer, try it and do a compare with the stock base file to see what i tweak in it.

Hope it helps.

Hello NISANDA, it is nice to hear from you again, thank you for the .cal file you have provided me earlier, and great thank you for the update, really appreciate!
I will compare the files today, to see and learn the difference, i will as well be going to my truck today, and going to test it, will try uploading the updated .cal files, will see yours, and as well will compare the .cal that i have udated with Fast355's help...

Thank you very much for your help!

Sincerely!