Okay so I made some progress..
I ended up tracing continuity on my P/N wire, and I have it.
Interesting to note The computer knows when I'm in neutral, but sees park as "Drive". What could this be?
Note:It will not start in neutral, and starts in gear. Weird..
Also made progress on seeing MPH on the 427.
I copied/pasted the xdf parameter at "5D02 "Output Speed Not From Drac" from standard Advanced $0D TP5 v251.xdf to my MAF $OD_MAF (NA).xdf found here on the ecu listing.
I took the vss wires from the VSSB (Purple, and Green) And used pins F2 and F3 respectfully.
I see MPH on the computer, but no longer my Speedometer, could someone help me with this?
Thanks again for the help.
Bookmarks