Thanks after a talk with a person named Ken at Oregoncamshaft, I mailed my old cam for a stronger cam regrind.

The cam I am getting is their strongest towing cam, with the following specs: 203 208 410 425 and 114 lobe, was told power range was 1000 to 4500RPMs.

I hope there is a program to show how an engine will run on the cam specs entered; all I have found is one that shows the cams specs like the photo:

I think I saw one that you inter all your engine specs and it would project how the engine would perform.

I am looking for one that will calculate the power curves, showing the torque curve and horse power curve at projected RPM.

Thanks.

Rich

Cam profile.jpg