Today was a next step with my pontiac
I made mods with ECM.
Installed EEPROM sockets for both sides. I want to say that there is no need in installing credit card pices. And no need to cut the bottom in a socket.
All you need is heated table and heatgun.
If you dont have a heated table you just can use household iron and a paper towel as a spacer.
Everything works perfect.

then I made some "cosmetic" mods:
1. Cat potection disable. I have cat delete.
2. Lowered the overheat enrichment protection
3. Lowered BLM Hysteresis for more accurate idle
4. AC clutch disable within lower TPS

5. Disabled AIR PUMP - DOESNT WORK!!! AIR pump still engages on start. And I see in logs. How to finally disable it?

6.Lower TEMP fans kicking.
7.Lowered IDLE to 500. Works perfect.