Results 1 to 6 of 6

Thread: Data cable

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 05-10-2020 #1
    Jakegsxr11
    Jakegsxr11 is offline
    Carb and Points!
    Join Date
    Apr 2020
    Location
    South Central Wisconsin
    Posts
    6

    Data cable

    I am trying to make a new data cable. All the references I have found include parts to dead links. I am trying to connect to a 1995 obd1 pcm with flashhack and eehack. Will this circuit board work and do I just need to connect the TX and rx terminals together and run that wire to the pcm along with a ground wire connected to that terminal?

    https://www.amazon.com/dp/B07VD4SDGZ..._WfZTEb2DVDSS7

    If it would work what should the power jumper be set to, 3.3v or 5v?
    Last edited by Jakegsxr11; 05-10-2020 at 01:59 AM.
    Reply With Quote Reply With Quote
« Shopping for COS 2bar, Gen 1, '411- '01 Camaro ECM | Please Help! Out of Ideas! »

Similar Threads

  1. TunerPro RT Data Logging - Saving the Data
    By Jeep71 in forum Introductions
    Replies: 1
    Last Post: 08-29-2019, 12:57 AM
  2. JET DST with AVT-852 cable
    By veee8 in forum TunerCat OBDII
    Replies: 6
    Last Post: 01-30-2018, 06:11 PM
  3. Got my cable ready to data log...Which XDF do i need?
    By jbrenneman13 in forum GM EFI Systems
    Replies: 10
    Last Post: 03-16-2013, 07:57 PM
  4. Importing Data Dash Data......
    By Nasty-Z in forum TunerPro Tuning Talk
    Replies: 12
    Last Post: 07-06-2012, 09:16 AM
  5. USB Cable won't connect to TunerPro for data Aqcusition.
    By EagleMark in forum TunerPro Tuning Talk
    Replies: 0
    Last Post: 02-20-2012, 11:04 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules