Knock sensor and related parts

[doc_rock]

Doc ---
My sincere apologies. You need the HDR1 ($10) to extract the bin from a 7730 MEMCAL, and not the HDR6. Don't know what I was thinking. That's why the extracted bin is garbage. HDR6 is for 128K.
I talked to Moates and they will exchange it if you sent them an email and then they will provide instructions. For expediency, you might consider an out right purchase and then a return for credit. But do send an email or call at 225-341-3541. You might also talk to them about the proper procedure using your burner. I don't know because I use their autoprom and TunerPro. Again, apologies!

HDR1 instructions here: http://www.moates.net/documentation....entation_id=12.

thank you!!!
I'll get on it right now with them - well - in between conference calls or whatever it is.
I'm beyond pleased we identified an issue - I hate throwing parts at anything.

I'll let you know when that comes back. Thanks again!

edit: So that also explains why everything was all strange in trying to compare the two .BIN, copy over the data (I had to copy the entire .bin, except for the last 10 or so lines) and nothing was the same in the file comparison.