1228747 akwa and $4f

[chris989]

Hello all,

I do not do a lot of tuning and Tunerpro is my kryptonite. Seams like every time i use i have issues.

Anyway, Truck hasn't been running right so i pulled the ECM. Was going back to the stock tune and i discovered my chip isn't even in there. 120 miles of back country washboards it mus have fallen out of the socket extender. I have extra ships and was going to buen a stock AKWA bin and all of the scalars are 171 and all of the tables are blank. What am I doing wrong?

Thanks in advance,
Chris

[dave w]

Link to gearhead-efi 1228747 information: http://www.gearhead-efi.com/Fuel-Inj...Information-4F

dave w

[1project2many]

What is your source for the file you are viewing? Is this one you've read yourself? Can you post it? It may not have been read properly.

[chris989]

Link to gearhead-efi 1228747 information: http://www.gearhead-efi.com/Fuel-Inj...Information-4F

dave w

Dave,

I am using the bin and $4f XDF file from the link you referenced.

I just opened tunerpro in the office computer and it works perfect.
Yesterday I downloaded TP to a new laptop in the shop and that is the one not working. Very odd,, both using windows 7. I will delete and reinstall the software today and see if anything changes.

Chris

[JaydeeC]

I have a similar issue, but with a new tablet.
Hate to reply to a thread without advice, but I’m new, and I’m not sure if it’s my permissions or not, can’t start new threads.

Dave W, I followed your links to the EagleMark $4F (.adx, .bin, .xdf files page), just can’t get the tablet to read data. Any chance I can get some replies in this thread?

[chris989]

Jay,
If you want to PM me you phone number I can walk you through it.

Chris

[JaydeeC]

Chris, that’s a great offer, but the way my time is spread thin (life, work vs free-time and projects), I’d prefer on the forum for now. If I hit a point where I really need to be talked thru it, will send PM for a call.

The other hitch is that I have a Stage 2 454 PROM in the 8747 and she runs good, just not great. And right now I just want to identify problem spots in the data …but I can’t read it just yet. After that, I’d like to get a thread going about 454 swaps on the 8747 - got a lot of info supplemental to what’s here.

Thanks for the offer, and the quick reply. I really appreciate it.

One of the hang-ups is I can’t run TunerPro (yet) on a new Samsung A7 Tablet.
ALDLDroid is so close though.

[dave w]

I have a similar issue, but with a new tablet.
Hate to reply to a thread without advice, but I’m new, and I’m not sure if it’s my permissions or not, can’t start new threads.

Dave W, I followed your links to the EagleMark $4F (.adx, .bin, .xdf files page), just can’t get the tablet to read data. Any chance I can get some replies in this thread?

I don't have any experience using or configuring a tablet with TunerPro RT.

dave w

[chris989]

Jay,

Have you been able in the past to get the data/program to work with a PC laptop? Maybe use/borrow a laptop and confirm the configurations are correct and then repeat the set up with the tablet?

not what you want to hear but a dedicated laptop for your car may be the easy answer if you find the software cannot work correctly with the tablet. There are hundreds on CL for cheap.