super hard to read the package... so, aside from the inventory part. MFG>Name: VISHAY BC COMPONENTS . DESC: Resistor Metal Film, 1330km, 400mK, 12% resistance 133ohms, Resistance tolerance+- 12; , Power rating400mK; Voltage rating 250v..... Oh that's a red flag right there, must have been some a/c component. there were 10 in the bag originally , light green with bands including .. large dark brown, black, two light brown bands and one thin dark brown all in that sequence. How I wired it was I ran pin #10 white from green plug to red/wht tach signal wire on existing gauge cluster and connected all 3 wires intersecting and sent the wire with the resistor to key on power at the fuse block. All of the power at this fuse block is key on only. I am sure it can be accomplished.