Bringing all this together
Keep the 165
Run the Aussie bin
Keep the large cap HEI and ICM Since we have that
Keep the harness adding ALDL , O2 ECT IAT sensors. Any more needed?
From Moates is all I need is the APU1 ?
Does the 27SF512 chips work with the 165 and what socket adapter(s) will i need?
Jumping around a bit
I noticed there is no IAC just a manual adjustment will we need to add one ?
IAC.jpg (70.9 KB)
I'm seeing several auctions on e-bay
Where do you guys get the pins and plugs for the 165 ECM also whats the best extractor and crimp tools for it
Yes, add an IAC.
I would also add a VSS (I missed your earlier post asking about any additional sensors)
Yes, the 27SF512 will work in the '165, G1 is the adapter you need.
It may be easier to grab some connectors from the wreckers and use those as pig tails. The pins are available on their own, I just haven't sorted out which ones are correct... yet... I plan to get them in stock soon-ish. lol
To depin the connectors are pretty easy, the locks need to be removed (blue combs that are inserted from the wire end), then using a small tool, like a pin, or a stiff paper clip, etc, the hole below where each pin is inserted is where the lock is, just insert your tool, and push towards the lock, while gently pulling on the wire will extract the pin.
The man who says something is impossible, is usually interrupted by the man doing it.
An FYI
https://www.dynamicefi.com/RePinHowTo.php
I'd like to find some "open barrel" pins too. I recently bought this crimping tool, it works pretty good.
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
Here's an example of some crimps using the tool (different connectors but you get the idea), it took some practice to get it down, LOL
Pig Tails.jpg
Bookmarks