I just did a compare of the 3bartest bin and a 12225074 bin. The cos is 9 tables short due to code modifications. Anything outside of these tables should work fine.
We can also port the specific cos tables to be found since the patch is unique pattern and very easy to add. Unfortunatelly I don`t know the size and scaling of tables, the names of the tables and the address of the tables.
I also did a quick compare to check what is patched. I can clearly see the address of the tables being addded. But again have no idea what they are.
Can you post some screenshots of the cos tables and possible an address if you have managed to find it.
On another note about copying tables from one bin to other
There is an automated functions already built.
Case1
you have a good bin and want to save a template of lets say 50 tables. And later copy that 50 tables to a random bin of your choice.
Mark the tables in the list view. [Using shift and CTRL buttons]. Than rigth click and select create patch. Save and name the patch.
To apply the template, open your new bin utilities->apply patch
A dialog will pop up with the available patches. Select the template patch and apply. All the saved tables will be copied to the new bin.
If not all tables are present in both bins in the log you can see which tables are missing and which one being copied.
Case2
If you want to quickly copy tables from 1 bin to another.
Mark the selected tables -> right click -> copy selected tables to
Than select the bin/bins you want to copy the tables. A pop dialog will show up and just follow instruction to apply and save the new bin.
Bookmarks