This is one issue, that bring confusion alot.
Hope it gets cleared once and for all.
There is 2 type of settings. First settings is for 512kb bins. It got 3 settings 0=class2,1=PWM,2=NONE.
The other type is for 1mb bins and 512kb flex fuel bins. It got 2 settings 0=class2,1=None
Most people just copy over settings from commercial software, and apply the 3 settings types to all xdfs, not aware they are not used on all bins.
If you have bin that shows out of range, just set it appropriate to the bin.
Bookmarks