Joukoy, I could not find beta version 0.17.3, only one I could find was 0.17.12. Am I looking in the wrong place?Originally Posted by joukoy
Joukoy, I could not find beta version 0.17.3, only one I could find was 0.17.12. Am I looking in the wrong place?
17.03 is outdated. Instead use the latest one 17.12
Meanwhile new tuner explorer under development.
Tuner_explorer.jpg
Only latest version is directly available.
But don't worry, XDF export is not modified after 0.17.3
I just could not find the "Export XDF" tab in 0.17.12. I see it in 0.16.43 right next to "Extract segments". Has it moved or been disabled for the beta version?
What do you plan to do with the xdfs. They only support basic stuff and can`t handle good enough enumeration and other complex array configurations.
Last edited by kur4o; 04-06-2021 at 07:55 PM.
Moved to: Tuner -> Utilities -> Export
I was just going to test as Joukoy had asked above.
Thank you, I tested it and it appears to have worked. I was able to open the xdf in TunerPro and it appears to display the same data the parameters as in UniversalPatcher.
NO worry, testing on any features is highly needed.
We would like to hear any feedback positive or negative, and will also appreciate suggestions, features requests, new ideas for design and improvements.
I like to help anyway I can. I was also able to import an xdf I have been working on and I noticed that some of the parameters were duplicated between what UniversalPatcher has and what was imported. One of them was the main VE table, with the only difference being in what units the parameters are being displayed in. Is there a quick way to sort and remove duplicate parameters?
Here is the VE table from UniversalPatcher:
VE Table UP.jpg
Here is the VE table from the imported xdf:
VE Table TP XDF.jpg
Thanks.
Good to know it is fixed now.
Program seems great, however it is not fully opening my 12587604 bin file
Last edited by creativelemon; 11-20-2021 at 08:01 PM.
I do have lots of 12587604 bin files and they all load fine without issues and all the tables are sound and perfectly aligned.
Maybe you are using corrupted bin or some custom modified one.
It will be good if you have problem with a file first to post it and than complaint it is not working.
im attaching the bin file, other stock bin for 12587604 have had same results. Im far from an expert but it just seems incomplete. For example the idle table is missing.
Last edited by creativelemon; 11-20-2021 at 08:02 PM.
it is also missing timing table, rev limiter, fuel table etc.
Last edited by creativelemon; 11-20-2021 at 08:03 PM.
I looked at the bin and there is no proplem loading any of it. There are like 900+ tables available for editing, and also compare the results with more popular 7603 OS. All seems to be lined up correctly and the values are not out of sense. There is no errors opening the bin too.
Can you please provide more specific information about the problem you are experience. Like tables that are not lined properly, or missing tables that are available in other bins.
It is really bad to say something don`t work, but at the same time, give so little information about the actual problem. I hope you are more specific with some examples.
Posting Permissions
Reply With Quote
Bookmarks