New LS1 Tuning Tool [Universal Patcher]

[blue68deville]

There are various shift light settings. It can be driven by serial data or directly from pcm pin. However not sure the pin is known.
I checked a manual vette bin and the logic is not used at all. All settings are maxed out. I think it is there but have no real application. If we can find a bin that uses it, it will be easier to add it to other bins.

I found a P01 bin that uses the skip shift light. It's a 98 F-body, as of 99 it went to serial data per the wiring diagrams. Same circuit #375. It's on C1 Pin 40 vs the P59 C2 pin 477. Not sure if that is helpful, but I'll keep looking.