New LS1 Tuning Tool [Universal Patcher]

**kur4o** · 11-13-2022

Finally some updates are released[at first post of thread]. Added more parameters for Tcc ,transmission, knock tables and more.

Latest version is also uploaded and includes some initial graphing and histograms + lots of overall improvements.

**zack4200** · 11-16-2022

I'm having an issue with fwd v6 BINs - all of the tables that originate from TinyTuner have the Min and Max values in the table config set to 0, so most tables can't be modified. All of the tables I've looked at have the Hard limits min/max at values that make sense, and if I edit the table config to match those (or anything else) then I can actually make changes. The small number of tables added from seek have actual min/max values so I'm guessing it's a problem with the TinyTuner DB somehow? I've tried with several different BINs and they all behave the same way.

Another problem I stumbled upon while trying to figure out what was going on with the min/max values: If right click a table from the list and select "Edit table config" and then make changes, they don't get saved. However editing the values directly in the list does update them. Is this possibly just me misunderstanding what edit table config is used for?

is there a way to edit the table config from the tree view as well, or only from the list view?

And finally on a slightly unrelated note - is it possible to remember the compare view that was selected when changing tables rather than having to choose show compare every time a new table is opened?

**joukoy** · 11-16-2022

Originally Posted by zack4200

I'm having an issue with fwd v6 BINs - all of the tables that originate from TinyTuner have the Min and Max values in the table config set to 0, so most tables can't be modified. All of the tables I've looked at have the Hard limits min/max at values that make sense, and if I edit the table config to match those (or anything else) then I can actually make changes. The small number of tables added from seek have actual min/max values so I'm guessing it's a problem with the TinyTuner DB somehow? I've tried with several different BINs and they all behave the same way.

Another problem I stumbled upon while trying to figure out what was going on with the min/max values: If right click a table from the list and select "Edit table config" and then make changes, they don't get saved. However editing the values directly in the list does update them. Is this possibly just me misunderstanding what edit table config is used for?

is there a way to edit the table config from the tree view as well, or only from the list view?

And finally on a slightly unrelated note - is it possible to remember the compare view that was selected when changing tables rather than having to choose show compare every time a new table is opened?

Issues should be fixed in latest version (0.21.9)

**zack4200** · 11-16-2022

Originally Posted by joukoy

Issues should be fixed in latest version (0.21.9)

Perfect, thank you! That was really fast

**zack4200** · 11-16-2022

I came across another issue - in 0.21.9, seek doesn't find the tables DTC.Codes or DTC.MIL_enable - they show up when I use 0.20.26 with the same BIN. I tried several v6 BINs all with the same results.

I did also check a couple of P01 BINs in both versions and the DTC and MIL tables work correctly in those on 0.21.9

**joukoy** · 11-17-2022

Originally Posted by zack4200

I came across another issue - in 0.21.9, seek doesn't find the tables DTC.Codes or DTC.MIL_enable - they show up when I use 0.20.26 with the same BIN. I tried several v6 BINs all with the same results.

I did also check a couple of P01 BINs in both versions and the DTC and MIL tables work correctly in those on 0.21.9

Can you send link to at least one bin-file with this problem, I want to confirm my fix.