I'm looking for a 4l60e stand alone transmission controller. This will be for a 1975 C10 with a 350 SBC. I'm located in NC.
I'm looking for a 4l60e stand alone transmission controller. This will be for a 1975 C10 with a 350 SBC. I'm located in NC.
Last edited by custodian; 04-16-2021 at 02:28 PM.
I am currently controlling a 4L85E with a 0411 running a carb. Just needs RPM input to the crank sensor, vehicle speed, coolant temp, MAP and TPS signals to properly shift. The 0411 is also controlling my vortec distributor, cooling fans and a/c compresssor as well as outputing a signal for the speedo and abs. Ran my 97 Express van for over a year with a carb on it.
Maybe a standalone 16197427 94-95 TBI computer would be an option? The link below has information for the 4L80E, the 4L60E would be similar:
https://sites.google.com/site/astros...h-16197427-ecm
Maybe the 1975 C10 has a HEI distributor that can trigger the 16197427 computer.
Maybe there is a way to fabricate a Throttle Position sensor to the 1975 C10.
dave w
Is this a DIY project that you are sourcing parts and / or technical drawings for?
Are you looking for a Plug-n-Play "junk yard fabricated" 4L60E controller?
dave w
Bookmarks