Wanted Transmission Controler

[custodian]

I'm looking for a 4l60e stand alone transmission controller. This will be for a 1975 C10 with a 350 SBC. I'm located in NC.

[Fast355]

I'm looking for a 4l60e stand alone transmission controller. I'm located in NC.

I am currently controlling a 4L85E with a 0411 running a carb. Just needs RPM input to the crank sensor, vehicle speed, coolant temp, MAP and TPS signals to properly shift. The 0411 is also controlling my vortec distributor, cooling fans and a/c compresssor as well as outputing a signal for the speedo and abs. Ran my 97 Express van for over a year with a carb on it.

[custodian]

I am currently controlling a 4L85E with a 0411 running a carb. Just needs RPM input to the crank sensor, vehicle speed, coolant temp, MAP and TPS signals to properly shift. The 0411 is also controlling my vortec distributor, cooling fans and a/c compresssor as well as outputing a signal for the speedo and abs. Ran my 97 Express van for over a year with a carb on it.

I updated my post. I need one for a 1975 C10 with a 350 SBC that I'll be putting a 4l60e in.

[dave w]

Maybe a standalone 16197427 94-95 TBI computer would be an option? The link below has information for the 4L80E, the 4L60E would be similar:
https://sites.google.com/site/astros...h-16197427-ecm

Maybe the 1975 C10 has a HEI distributor that can trigger the 16197427 computer.
Maybe there is a way to fabricate a Throttle Position sensor to the 1975 C10.

dave w

[custodian]

Maybe a standalone 16197427 94-95 TBI computer would be an option? The link below has information for the 4L80E, the 4L60E would be similar:
https://sites.google.com/site/astros...h-16197427-ecm

Maybe the 1975 C10 has a HEI distributor that can trigger the 16197427 computer.
Maybe there is a way to fabricate a Throttle Position sensor to the 1975 C10.

dave w

It does have an HEI distributor and a Holley 4010 carb. Holley make a TPS for a stand alone system.

[dave w]

Is this a DIY project that you are sourcing parts and / or technical drawings for?

Are you looking for a Plug-n-Play "junk yard fabricated" 4L60E controller?

dave w