WTB 411 ECM

[custodian]

Looking for a stock calibrated 411 ECM, shipped to Catawba, NC 28609.

[B52Bombardier1]

The 0411 PCM / ECM devices are abundant in the junk yards these days for short money - $32.00 around here. You and a few small tools including a 7 mm socket and ratchet can be on your way in a very short time with your 0411 PCM.

Rick

[custodian]

The 0411 PCM / ECM devices are abundant in the junk yards these days for short money - $32.00 around here. You and a few small tools including a 7 mm socket and ratchet can be on your way in a very short time with your 0411 PCM.

Rick

Not around here. I can find the 2003 up ECM everywhere, I have two of them.

[2xls1]

Looking for a stock calibrated 411 ECM, shipped to Catawba, NC 28609.

Calibrated for what? there are hundreds of stock calibrations a 0411 could have in it when bought at a salvage.

[B52Bombardier1]

I think I'm about to go on an odyssey quest to corner the market on inexpensive 0411 PCM devices here in northwest Louisiana. They are relatively abundant around here but my wife will think I'm even nuttier when I bring a few more home. This vintage of LS engine-equipped truck does not rust out here but this is their time to wear out.

Rick

[custodian]

I think I'm about to go on an odyssey quest to corner the market on inexpensive 0411 PCM devices here in northwest Louisiana. They are relatively abundant around here but my wife will think I'm even nuttier when I bring a few more home. This vintage of LS engine-equipped truck does not rust out here but this is their time to wear out.

Rick

I'll buy one and pay the shipping.

[B52Bombardier1]

Hello,

PM me your address, your tire height, rear differential ratio and I will put one in the mail to you. $32.00 plus shipping, probably the twelve buck flat rate USPS box.

Edit: Also, your desired engine RPM. I set mine to 650 RPM but anything is possible. Also, have you considered using the "0896" variant of the red / blue PCM? It is also a 512k byte device that appears to be functionally equivalent to the 0411 with the possible exception that the 0896 might stream parameter ID's for logging slightly slower than a 0411 - both work well for me here in this regard.

Rick

[custodian]

Hello,

PM me your address, your tire height, rear differential ratio and I will put one in the mail to you. $32.00 plus shipping, probably the twelve buck flat rate USPS box.

Edit: Also, your desired engine RPM. I set mine to 650 RPM but anything is possible. Also, have you considered using the "0896" variant of the red / blue PCM? It is also a 512k byte device that appears to be functionally equivalent to the 0411 with the possible exception that the 0896 might stream parameter ID's for logging slightly slower than a 0411 - both work well for me here in this regard.

Rick

I want one that I can program myself. They have been scooped up from the junkyards around here. I have two others from a 2003 and 2005 6.0 Yukons.

[custodian]

Calibrated for what? there are hundreds of stock calibrations a 0411 could have in it when bought at a salvage.

Stock, 5.3, 4l60e, ect.