happy sunday all.
ive been under this truck fixing things the engine swap guy broke.. ,more on that moron at the bottom. currently 9mpg and a WOT AF/R of 12.4...sooo bad.

well i had the whole story typed in here to explain what led me to here, however i walked away for a minute, got auto logged off, POOF! SHE GONE!!
short version, i love this truck, it is a fully loaded model with air suspension, all dealer service (before me) and in amazing condition for the 261K on the chassis.
oh well, i am here looking for some help with a BIN file that will get me close and then tune the fine parts.

i have my bench harness working and tested on both the ECM in the truck and the Donor ECM.
i have read bin files from both and written back to the donor
main issue is the cam, otherwise i would just put the stock tune and the 4l80 trans swap

Vehicle config
2005 Yukon XL SLT autoride
electric fans, digital AC, sunroof, (every option for the year)
LQ4, 317 heads w/CAM - duration 212 220 Lift 557 560 LSA114
Long tubes, 3" back
4l80E stock converter
3.43 rear gears
tire 265/70/17

the OS i have on the donor ECM is 12587603

if one of you could point me in the direction of a set to start with, have one available, that would be awesome.
or if your in Texas, ill buy you a couple beers for it.
Thanks!

[06:11:16:212] Serial Number:1LA0QPWQ4048
[06:11:16:239] OS ID:12587603
[06:12:53:992] Engine Calibration ID: 12587691
[06:12:54:017] Engine Diagnostics ID: 12587955
[06:12:54:042] Transmission Calibration ID: 12587979
[06:12:54:067] Transmission Diagnostics ID: 12578788
[06:12:54:091] Fuel System ID: 12578801
[06:12:54:116] System ID: 12585937
[06:12:54:141] Speedometer ID: 12579027
[06:12:54:166] Broadcast Code (BCC): YFXL
[06:14:12:163] Gathering Data Based On Hardware ID...
[06:14:12:185] Hardware ID: 12583660
[06:14:12:187] PCM Type: P59
[06:14:12:190] PCM File Size: 1024kb
[06:14:12:192] Flash Chip Type: AMD
[06:14:12:193] Supports Drive By Wire: YES

ok, if you want to know the background of how it got to here, it is below, if not, stop reading here.

 i love this truck, it is a fully loaded model with air suspension, all dealer service (before me) and in amazing condition for the 261K on the chassis.

i used to be a line tech doing motor swaps and building import hot rods, and swapped a few 5.7l back when. 20yrs later i tried to act like an adult and pay a person to put an LQ4 and 4l80e with a cam.
he put a cam in, not the one i gave him top put in...jerk! he removed the cats without asking, put on long tubes and then welded a crush bent 2.5" pipe inside the 3" collector, and then the Junk 4l80e blew up 800MI away got swapped out on the road. with another questionable one from a kansas wrecker. then the tail shaft bearing went, i changed that.

based on the reading from the Live OBDII data, this jackass silenced almost all the MIL and CEL lights and codes, i can unplug all the 02 sensors and no CEL... plus the way he "TOONED" it, i am getting 9MPG and....
sorry, it still stings. anyway, the moral is now i am in too deep to give up on the old girl, and want to start from the right place. i have replaced the exhaust from header back with Mandrel 3" , 2 x HF cats, stamped X-pipe, 2x resonators and, adding 2 more mufflers tonight because it is wayyyy too loud.