Quote Originally Posted by 6150ryan View Post
Can anyone advise me what I might have wrong. P01 , tuner pro bin, OBD Link LX, and PC Hammer. Test write shows successful erase and write, but when I try to write I get an error, unable to erase flash memory. Not sure how to fix this issue. I appreciate your help!
Here is what I see:

[11:56:21:646] PCM Hammer 021
[11:56:21:646] Tuesday, February 13 2024 @11:56:21:64
[11:56:23:394] Voltage: 12.2V
[11:56:23:410] Elm ID: ELM327 v1.4b
[11:56:23:426] ScanTool device ID: STN1155 v5.6.19
[11:56:27:152] VIN: 1GCHC29U62Z322717
[11:56:27:199] OS ID: 12212156
[11:56:27:202] Hardware Type: P01_P59
[11:56:27:236] Calibration ID: 12212431
[11:56:27:256] Hardware ID: 9386530
[11:56:27:381] Serial Number: 2EB33YSA2130
[11:56:27:459] Broad Cast Code: DMNP
[11:56:27:506] MEC: 0
[11:56:48:443] C:\Users\ryanh\OneDrive\Desktop\PCMhammer\Boat OS12212156 2002.bin
[11:56:48:459] Validating 512k file.
[11:56:48:459] Start End Stored Needed Verdict Segment Name
[11:56:48:474] 00000 7FFFD EFCC EFCC Good Operating system
[11:56:48:474] 08002 13FFF BAA6 BAA6 Good Engine calibration
[11:56:48:474] 14002 16DFF A935 A935 Good Engine diagnostics.
[11:56:48:490] 16E02 1BDFF EAAB EAAB Good Transmission calibration
[11:56:48:490] 1BE02 1C7FF FDED FDED Good Transmission diagnostics
[11:56:48:490] 1C802 1E51F 9472 9472 Good Fuel system
[11:56:48:506] 1E522 1EE9F 4A68 4A68 Good System
[11:56:48:506] 1EEA2 1EF9F 22CB 22CB Good Speedometer
[11:56:48:521] Requesting operating system ID...
[11:56:48:711] PCM and file are both for the same Hardware P01_P59
[11:56:48:726] PCM and file are both operating system 12212156
[11:56:48:883] Unlock succeeded.
[11:56:48:934] This interface does not support VPW 4x
[11:56:49:749] Kernel upload 9% complete.
[11:56:50:809] Kernel upload 22% complete.
[11:56:51:833] Kernel upload 35% complete.
[11:56:52:821] Kernel upload 48% complete.
[11:56:53:810] Kernel upload 61% complete.
[11:56:54:885] Kernel upload 74% complete.
[11:56:55:914] Kernel upload 87% complete.
[11:56:56:928] Kernel upload 100% complete.
[11:56:58:250] Kernel Version: 01030501
[11:56:58:250] Kernel uploaded to PCM succesfully.
[11:56:58:375] PCM and image file are both operating system 12212156
[11:56:58:480] Flash chip: Intel 28F400B, 512kb
[11:56:58:539] Calculating CRCs from file.
[11:56:58:539] Initializing CRC algorithm on PCM, this will take a minute...
[11:57:09:754] Requesting CRCs from PCM.
[11:57:09:817] Range File CRC PCM CRC Verdict Purpose
[11:57:09:832] 060000-07FFFF not needed not needed n/a OperatingSystem
[11:57:09:848] 040000-05FFFF not needed not needed n/a OperatingSystem
[11:57:09:863] 020000-03FFFF not needed not needed n/a OperatingSystem
[11:57:13:940] 008000-01FFFF C59160D5 D536941B Different Calibration
[11:57:13:956] 006000-007FFF not needed not needed n/a Parameter
[11:57:13:956] 004000-005FFF not needed not needed n/a Parameter
[11:57:13:971] 000000-003FFF not needed not needed n/a Boot
[11:57:14:003] Processing range 008000-01FFFF
[11:57:14:018] Erasing.
[11:57:22:312] Unexpected response to STPX with data: STPX H:6C10F0, R:1, D:3D05008000 7F 3D 05 00 80 00 11
[11:57:22:330] Unable to erase flash memory: Error