My dad lives in a subdivision that has a pretty slow speed limit and wants the transmission to shift into 2nd sooner to lower the RPM when creeping around the block. I adjusted the 1->2 shift table (D0901 - Part Throttle Shift Speeds - Normal Mode (MPH)) down a few miles an hour (most of them down from 12ish to 10mph), but there was not change in shifting as the truck still waits until upwards of 16mph (as reported while logging, although speedo matches) to shift into 2nd. Is there some other table that is keeping the truck in 1st after the shift table says it should be shifting? The only other table that looked interesting for this is D0701 - Shift Pressure - Normal Mode (PSI). Thanks in advance for any help.