Custom air box pic request and K&N warning.

[trlrider]

I want to do that on my 88 - only with a 2" cowl hood maybe? When you get yours built, post what you did with part #s and I'll steal your design with pride

LOL! Will post it up once the cold air box gets going, but more then likely late summer after my son's shooting season ends in July.
Will not be any part numbers. Will be hand fabricated. The air box will sit on the carb and be fit to seal on the hood. The T/A scoop will be molded into the hood. Figured it would be just to big a pain in the rump to make it a true shaker and considering I am still playing around with intake and spacer combinations it will be easier to adjust the air box then the scoop itself.
As it sits currently with the factory air cleaner assembly there is about a 1/4 clearance from the top of the lid and the hood. Tall intake, TBI adapter and additional spacer. I plan to use a air filter assembly similiar to what you have in your profile pic with the filtered top and a drop base.

The plan is to first build one from aluminum sheet much like we use on late model stock cars. One the design is baselined and shows to work we will take it down to my neighbors shop and build a mold to build a fiberglass or carbon fiber copy.He has plenty of scrap material from his business to do either. At least that is the plan.