Results 1 to 2 of 2

Thread: New Here

  1. #1
    Carb and Points!
    Join Date
    Jun 2021
    Age
    31
    Posts
    1

    New Here

    Hey all, I'm working with a 0411 ECM in my LS swapped Camaro. I'm getting into tuning my car myself mostly because I need to make AC configuration changes and would like to do it open source. I'm curious if when I load a bin into Tuner Pro with an XDF, will the XDF populate the configuration in the BIN, or what is set in the XDF when it was created?

    Photo of my Camaro I'm working on.


  2. #2
    Fuel Injected! trlrider's Avatar
    Join Date
    Jul 2020
    Location
    Geronimo, TX (Guadalupe County)
    Age
    58
    Posts
    177
    Welcome to the fun!
    The .xdf is basically the road map for the .bin! They have to match or you will have odd readings or none at all.
    Read your PCM and get the .bin id! Then find a matching .xdf file and .adx file for logging.

    Note: Not all .bins have a matching .xdf, so you may have to find one that is closest to your configuration and go from there.
    There are dozens of how too and why's in this forum.

    Lot's of helpful folks on this forum.

    Louis
    Jack of all trades, absolutely master of none! Too many projects, not enough time and limited funds.
    Geronimo, Guadalupe County, Texas
    1993 K1500 Suburban - SBC Refit retraining the TBI and Computer Control.
    2004 Z66 Avalanche 5;3 to 6.0 LQ9 upgrade - project pending

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •