Have a Jeep Wrangler , SBC / 700R4 combo , '7427 PCM .

Need to input a speed sensor to the PCM , I thought I have read somewhere that the '91 Wrangler VSS (the one with the cable pass through ) would output the correct PPM for the GM PCM , but I can't find where I saved the link . I will be using the 2000 PPM input on the '7427 like I do in my S10 V8 conversions.

Does anyone have any idea if the Wrangler VSS has the correct PPM for the '7427 , or if there is a way to correct the siginal that the PCM would see from this sensor if it is the wrong one.

Or should I just bite the bullet and order the JTR piece ?

Thanks

TOM