-
FIXXED....quick help tunerpro chip read function???
Long version........
Trying to familiarize myself with the new equipment.
So I got my AutoProm all hooked up inside where its WARM (freezing out by the way), tunerpro rt going.
Pulled the eprom out of a 7747 I have sitting here, thinking I should start by trying to read a stock chip. Put it in the AutoProm as stated on the quick start.
Tools
>hardware utilities
>moates prom I/O
>supported chip set as "2732A (read only)
>read chip
and I get
"reading device into buffer..."
"ERROR: Memory range and/or address outside selected eprom size"
now if I do the same but chose any of the following
29C256
29F040
27SF512
I get a progress bar and then
"PROM I/O succeeded"
?????Pretty sure thats not right?????
Also pretty sure its my oops, not the equipment.
So what am I doing wrong here?
Short version......
HELP!!
Thans in advance,
Jim
Last edited by Blazer3664; 12-27-2012 at 09:06 AM.
1978 Cherokee chief
Current status =
BACK under construction
modified body w/TJ flares
AMC 360, junkyard 7427 TBI w/ 4L80e
NWF doubler w/ upside down 203
SOA D60/14B-FF
custom shackle flip w/F150 springs
H1 wheels + (for now) tires
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks