Hi, I now have the super AUJP v4 adx file installed to allow the wideband connection into pin c21 on the ECM, it works and I'm getting data up in the dash when connected but the data is wrong. I'm running a innovate Mtx gauge which has a 0-5v linear output to the ECM ,can anybody advise me which flags I should check/uncheck in the wideband section to get it display the correct data.
These are the files being used in tunerpro rt
41026a_163.binSAUJP_V4_01.ads8D_SAUJP_V4a.xdf
Cheers IAN ..
Bookmarks