long time reader, but first time posting.
ok...heres some background. I have a Jeep 258 (4.2L) with a DIY TBI from a 90 Astrovan. It's been months, but I finally got it all together, got it running with the astrovan ECM. It ran terrible. Then I changed the ECM to a 7747 with a G2 and APU1. Also an Innovate WB o2 sensor and gauge. It starts easy but runs rough for about a minute, then runs really bad, I think rich. Fuel pressure is 11.5#, timing is happy at around 10 degrees. I can emulate using the bin below, but I cannot seem to get any data from the ALDL. The APU1 says its connected but the info doesn't change from zero on my dashboard. Nothing is being recorded either. Is my ADX wrong? configured wrong? I've attached all the files I'm using as well as my first datalog.
If I can see what the engine is doing then I can take a stab at fixing it.
Reply With Quote
Bookmarks