data log of injector shut off on accelleration issue

[jim_in_dorris]

at 1.04.3 in the log, a bunch of error codes get set including code 55 pcm failure. Not saying that it is the PCM, however with all the data corruption going on, that is always a possiblity. I wanted the OP to try totally different software to see if the original BIN was the problem, not that I expect it to magically fix anything, as I think that it may be one of those cases where some of the sensor wires are run too close to spark plug wires or coil wires and causing interference. Mark has seen that before.