Ok well its official!!! Im onto the turbo build. i started tearing into the exhust routing this afternoon, plan to get most of the pipe finished off from the manifolds to the turbo tommorow.

One the tuning side, i ordered a 3 bar map sensor, which i plan to use with the $59 mask. I still need to read some more about the process but as of what i see and am told it will work with my ecu with little or no repinning. So as soon as i get the 3 bar map and do a little exhaust routing, Ill then begin to transfer some info from my $88 although im sure i can scrap most of that info from logging since it was on a N/A engine. I plan to run 7psi on the car, the internal wastegate is set at 7psi, and i dont plan on getting into rasing the boost till i know i can tune it well. Rather safe then sorry when it comes to boost.