I am getting 12 and 15 pulsing on my service engine light. I cannot get the injectors to fire when trying to crank the engine. I just put this engine in and did all the wiring to the computer and sensors using the diagrams on this site. The engine is a 94' 350 and me and my buddie just did this on his truck in Jan. Now Im doing my own. Triple checked everything and still not getting any gas when cranking. I have the purple starter wire tied to c9 as indicated in the schematic. What could be the cause of this? I even replaced the cap and rotor and verified I am getting spark. Fuel pump primes when power is applied to ECM. I am lost now. Any suggestions out there? What could be the cause of the injectors not shooting gas? I am lost at this point and need to take a break off it for a few hours?

EDIT: EagleMark split from other thread...