I'm using an $8D 7730 ecm with the S_AUJP_V4 xdf and adx with TunerProV5. I'm looking to see if there is a way to put the MAT inverse lookup table in the data stream or data trace teh file so I can watch whats happening and correlate data from my tune and see the load/RPM's at which the MAT table makes changes for my tune. I'm NOT a srtock motor, so the stock tables dont work and I am different AFR's at high rpms in hot and cold weather. I saw something about a patch, but I'm not familiar how to Patch a bin.

I'd rather know what load/rpm the gm/sec translates to when I'm making appropriate changes in my tune.

Thanks in advance for any help,
Sal