Ok, I remorted this before, but I finally got the time.
I've transplanted a 16197427 onto a old IH.
It'll idle, with some hunting, in neutral. but nothing too terrible. It ran "fine" before I put a cam in it. Now with added lumpyness it dies.
It's of course going into an auto (727), and it always thinks it is in drive.
I'm including an idle log and a log of me shifting it into D and it dying.
In this bin, I lowered the idle point to 650rpm because of the viscous coupling. I had been raising it to smooth it out. But this just made it more pronounced because it was trying to grab harder.
I have also done some tweaks to the BLMs since I logged this, to just pull some fuel out at idle.
But the timing and everything else should be the same.
Reply With Quote
Bookmarks