I just finished some testing.
I made some flashing and reading. Tested most of the M4 commands for proper configuration.
Nothing seems wrong for now.
I accidently made a flash on auto bin with skip ff enabled, and it filled some transmission tables with ff-s.
You may take a look at that.
I noticed that on the raw interface when I enable loop with main program disconnected it always close the port when message is received and than reopens it. That way frequency drops alot.
I can`t wait for eside logging and for speed logging too.
On the main dashboard where it feeds all the info, from the main message 0 or from other tabs? You can make a speed tab and select to feed the dashboard from there or some other tabs that have the same data format. Make internal map for the same parameters from different feeds and feed the dashboard from what is available.That way resolution won`t suffer on the most imprortant stuff like rpm map tps. Ihave no idea is it possible but It looks like a good idea.

I haven`t played with the new interface yet and my fisrt impressions are simply amazing.
Major improvements over the previous version.