I think my head is going to explode from the amount of reading I've been doing. This place is an amazing resource. I admit I'm a little nervous. This is my first attempt at converting an older style engine to EFI and tuning it. Hopefully I don't ask too many dumb questions...

I originally thought it best to buy the Moates APU1 AutoProm package for my project. But I was a little concerned about it being limited to the OBD1 Gm. Still, and amazing piece of kit. Instead I took a more universal and separate path for tools.

I purchased an Ostrich 2.0 for emulation, a GQ-4X4 universal programmer, and a FT232RL adapter for an ALDL cable I will make. The Ostrich I can use for a future Honda project I have, and the GQ-4X4 will be more useful for my bench. The GQ-4X4 will program a LOT more devices than just EProms/EEProms.

I also started some mods to the 16197427 memcal that will be used for this project. My plan is to modify the 16197427 PCM for MPFI use.

Some Pictures:













Progress will be slow but hopefully sure.

David