Dave: Am converting a Chev '95 350 to a 383 engine with Port Injection Manifold. Have tied the left bank and RH bank injectors into two connections along with +12 volts for the other side of the injectors. In converting a binary from throttle body injection to MPFI, setting the injector constant to a lesser value for the injectors, what other parameter(s) needs to made to the bin to make it use MPFI mode? That is, there must (guess) be two parameter for setting MPFI mode. I will use your stuff from the internet site, to set the other parameters when going from TBI to MPFI. May not understand all the parameters that need to be change, but that may beg further questions regarding individual parameters.