That's a very valid point LOL, I didn't look at the 92 ECM that hard, and I've been running on about 5 hours of sleep since Saturday. I think I posted a pic of my memcal on the previous page, but I bought some 3M ZIF sockets off of Amazon, and modified one of them to fit the memcal in my 8625. I should've paid more attention to the action of the sockets when I got them because on the ones I bought, there is no spring that holds them closed like on the AutoProm. I have to make extra sure that the lever is pushed all the way down and doesn't try to come back up, but once you get it all the way into the latched position, it does alright. I had to trim the cover a bit, but with some rubber edge-moulding around the hole, everything fits rather nicely, and the board is still protected. I put a little corrosion-x on the chip, and it's good to go. I guess I'll keep what I've got since it's a 28 pin socket, and it works!

20190224_151228 (2).jpg