OBD2 LT1 XDF $EE EEX creation

[Tom H]

Hi,

Still at looking through the '97 Flash code. Are the response codes known? Look at this code segment

*************************************************
* SEND MESSAGE: 
*************************************************
1B80  CC 80 86           LDD    #$8086        ; SUB-PARAMEATER 80 = D/L & EXECUTE
1B83  DD 15              STD    @$15        ; 

1B85  CC 18 76           LDD    #$1876        ; TSIDE MODE 36 REPLY
1B88  DD 13              STD    @$13        ; 

1B8A  C6 06              LDAB    #$06        ; MESSAGE LENGTH
1B8C  BD 02 3E           JSR    $023E        ; SEND MESSAGE TO DLC

1B8F  CE 03 FF           LDX    #$03FF        ; ZERO THE INTERNAL RAM
1B92  6F 00              CLR    $00,X        ; 
1B94  09                 DEX            ; 
1B95  26 FB              BNE    $1B92        ; 
1B97  6F 00              CLR    $00,X        ; 

1B99  CE 40 00           LDX    #$4000        ; SEND BREAK SYMBOL
1B9C  FF 10 60           STX    $1060        ; FROM DLC

1B9F  20 FE              BRA    $1B9F        ; LOOP UNTIL WATCHDOG HITS


This results in a reply of 6C F0 18 76 80 86
                            |  |  |  |  |  |
Priority -------------------   |  |  |  |  |
Destination tester ------------   |  |  |  |
Source TSide ---------------------   |  |  |
Reply to mode 36 -------------------    |  |
Submode D/L & execute ------------------   |
Code unknown to me ------------------------

Do we have any info regarding the reply code? The one shown sends the message just before returning to normal operation with a watchdog reset. My guess it is a "done and happy" message.

-Tom