Ive attached a pic of a log, mostly concerned with knock. It seems as if knock appears after egr commanded past 70%. Maybe egr should be disabled.
The ecu in the car is the 411 replacement for the original ecu with an older os that remains stock for replacement back to stock or for california emmissions. I also added a wire and momentary switch to c71 to enable the performance option. I believe the attached log is after triggering the perf button, i have another log with much less knock that Ill post also. I haven't adjusted any engine parameters, only trans and TCC so far. But with this second ecu I may as well learn and look at timing, fuel, spark and any other tweaks that might make sense since returning to stock is so easy! I'll also post the bin and xdf so if it helps anyone else its there for the taking. Thanks again.
log1.jpgTurns out I cannot upload a .csv file.
Bookmarks