No problem! I apologize that it took several posts before I actually went and had a look at the ARAR BIN more deeply; that should've been the first thing I did, but since it came from here I just trusted that it would be okay. D'oh!

The ARAP BIN checked out so it should be okay, and your car should start with it. Hopefully the fans work right too!

For BIN stacking a 16KB bin into a 64KB chip, I use Bin Size 16KB, Block Size 64KB, Chip Size 64KB. Then I just feed it the one BIN file I want to stack as Pos 0. Other way you could do it is Bin Size 16KB, Block Size 16KB, Chip Size 64KB, then place the BIN you want to stack into all four positions.