Thank you Tom and kur4o for keeping on with the goal of creating a read/write flash tool for these pcms!

Been away for a while. I'll the give read/upload from post#34 a go, although not sure how far I'll get using my adapter cables vs HBC. The new interface looks clean. I second kur4o's suggestion to keep a debug or log somewhere in case it's needed.

The file format of 192k stacked bin (3x64k: Tside Bank0, Tside Bank1, Eside) is a nice direct way to lay out the bin. As pointed out in post#42,44 this format will make things easier going forward with definition files, etc.

Eventually, it would be handy to be able to read/load bins into the tool from disk that may be in other formats such as non-padded 144k (post#24,43), 145k cal (post#38) or other(?) format. Once in the tool,they could be saved to disk in 192k format for editing or written to pcm. Similar to Bin Converter utility in FlashHack.

Thanks again to you and all contributors for great work and progress!

Jim