yeah I've got a couple of them with plugs I snatched from other cars and will go that route if I cant stick with the oem pre-wired relay.
on another note. I have this diagram I found as well:
0996b43f80231a25.jpg
A6 (pink/black) is switched ecu power. is B1 (orange) constant power or memory power? do these computers retain constant power? YES, "ECM B" FUSED B+
and do I need to worry about whatever the hot fuel module is? I want to say I dont as I think that just power the oem dash gauge?? CORRECT
I see how the starter has a purple/white coming from it going to the ecu. purple/white at the ecu is B5. do I tie into this? NO, IGNITION SWITCH "S" TO STARTER PRPLE WIRE. P/W WIRE IS FEED TO ECM FOR CRANK SIGNAL.
I also see the purple from the ignition switch. I assume that is the "ignition switch on" position WRONG, SEE ABVE. so I would tie from the ignition switch to all of the following: pink at coil, A6, B1 right?
Bookmarks