I finally cobbled together enough parts to put my OLDS 455 on $0D mpfi. Im down to injector data entry. I really don't have much back ground in electronics and software so I am always second guessing myself, so Im just wondering How I use the specs on the specs sheet. Do I use the offset that just says .2 ms or the open/close time thats 1.15/.75? Im not sure how I would enter the open/close if thats what u use. Injectors are EV6 style Accel 151848
Also, is there a $0D.bin on here that already has the pe and fan hack installed? Can i turn on the MAT sensor,or do i need it? My Dad is using a stock 5.7 .bin on his 403 OLDS without pe or MAT, with the fan hack installed. Just trying to get around re-inventing the wheel.
Thanks for all the info so far, Ive had lots of fun