I've had 100% Success / ZERO% Failures with the re-ground camshafts I've purchased from Oregon Camshaft: http://www.oregoncamshaft.com/
dave w
I've had 100% Success / ZERO% Failures with the re-ground camshafts I've purchased from Oregon Camshaft: http://www.oregoncamshaft.com/
dave w
Thanks after a talk with a person named Ken at Oregoncamshaft, I mailed my old cam for a stronger cam regrind.
The cam I am getting is their strongest towing cam, with the following specs: 203 208 410 425 and 114 lobe, was told power range was 1000 to 4500RPMs.
I hope there is a program to show how an engine will run on the cam specs entered; all I have found is one that shows the cams specs like the photo:
I think I saw one that you inter all your engine specs and it would project how the engine would perform.
I am looking for one that will calculate the power curves, showing the torque curve and horse power curve at projected RPM.
Thanks.
Rich
Cam profile.jpg
My last request was answered on https://garage.grumpysperformance.com/index.php a place where Rocket Scientist's play with cars...
OMG the knowledge there was so humbling to me after 59 years of THINK I knew a lot about cars....
So one of the members has a PROGRAM, that even had my 193 swirl port heads and my TPI intake system. the only thing it did not do was the Roads lifters so we did one with just the cam and one with the Cam and lifters and we got this (after a bunch of other things like piston to deck etc.)
And it is everything I dreamed of:
is the engine tuned and running? or is it just a desk top dyno like computer program?
Bookmarks