Tunerpro RT transmission data logging

[Parts]

Hi everyone,
I have swapped a 5.7 TBI into a 95 S10. I am using the 4L60e that came with the truck, and a 7427 computer for control. I have the VSSB calibrated for my application with by moving the jumpers, custom PROM chip and am working through the fueling, etc.

I'm getting what feels like very fast shifts. It feels like it is going into 2nd at 5mph and 3rd at 10 mph. I am trying to log the trans data to see line pressures, what gear it is in, etc. I am using "A217 $0D TP5 v250.adx" and "Advanced $0D TP5 v251.xdf" from the forum.

Thanks for the help!

[Parts]

Ok I found the correct ADX in the 7427 section of the forum, the ones labeled "...trans 1...." and "...trans 2...." For a $0D mask

It says I am in 65th gear going 120 mph at idle, so I guess that's why it's shifting so quickly. I suppose I will double check all my wiring, but is it possible I'm using the wrong adx for my bin? I started with all $0D bin/adx/xdf files for the 7427.