It was just a starter bin for you, worked fine in car I used it on, I hope I gave you the right one? is there an error code set? Did the motor run on another bin?
It was just a starter bin for you, worked fine in car I used it on, I hope I gave you the right one? is there an error code set? Did the motor run on another bin?
1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
-= =-
i flashed the pcm with the bin you gave me. it starts run very low idle then dies. it ran on stock bin
and wat do u mean by error code set
DTC codes? Are there any error codes set? Is your check engine light hooked up? Turn key on but don't start engine. Does CEL come on, blink and stay on with key on? Go off when engine is started?
1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
-= =-
Im not forsure have hooked up the mil light but i wil. The pcm Provides a ground for that right?
Yes. Called MIL (Malfunction Indicator Light/Lamp) in this wiring diagram.
1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
-= =-
do you happen to have another manual lt1 Iron head bin and how do I delete the trans control on the pcm using tunerpro?
There was never an Iron Head Manual trans. But here are the bins we have.
http://www.gearhead-efi.com/Fuel-Inj...rmation-EE-EEB
Did that one not work? You never said what the CEL was doing or codes?
1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
-= =-
Thats wat i thought but i didnt know if there was a why to disable the trans function and i used alot of the bins u have it most.run then die with vats off so idk and im sorry about the light. I havent the chance to hook it up
Have you tried to connect to data with TunerPro? Record some data and post here so we can see what it is doing.
Do you have wirless internet near car? Do you know how to allow remote access? May be quicker to set up data/ADX file if I did it?
1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
-= =-
If it runs and dies on all bins then stick to the one I gave you. It is the only steel head manual trans bin in existence.
What is your batterey voltage when idling? What is fuel pressure? CEL? This is a transplant and many things can go wrong.
1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
-= =-
fuel pressure is about 40-41 psi at idle. 13.8 volts at idle. im running ur 95COP bin it runs on it but it wants to die but then it revs up,goes normal idle then does it again. Could oxygen sensors cause it? and no i dont know how todata log, im using the uber-easy aldl cable.
Bookmarks