I recognize a bunch of names from looking around,mybe someone remembers me from Monodax.
Glad we finally have a forum back for TCII.
I'm from Oklahoma.
Not good at these,so there ya go.
I recognize a bunch of names from looking around,mybe someone remembers me from Monodax.
Glad we finally have a forum back for TCII.
I'm from Oklahoma.
Not good at these,so there ya go.
I hope it fills the need and others come and feel welcome.
1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
-= =-
The name looks familiar. You're on Pacific Performance forum as well??
Depends on how much money I owe you.
<$10 =yeah
>$10 =no,still looking for the bastard myself.
It's $10 even.Depends on how much money I owe you.
<$10 =yeah
>$10 =no,still looking for the bastard myself.
And now that you mention it, those "low monthly payments" weren't supposed to be in pesos.
Actually, I'm the guy who put a 302 into a Suburban just before Christmas.
Last edited by 1project2many; 02-04-2013 at 02:57 PM.
Lost trans
Installed trans
Have another trans for sale
Coolant leak... possible radiator
No time for tuning.
Fuel gets expensive so not driving it too often :(
Sorry I asked...
1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
-= =-
Gotta love projects,have a few similar now.
My favorite is my wifes impala,especially since it is just for taking kid to school and doctor lol.
blew head gasket in 3800
swapped in salvage 3800 s/c
wiped out trans in 200 miles
rebuilt trans
motor wiped rod after 200 more.
overkill rebuild almost complete.
Don't be. Runs well, starts a little funny, could get better mileage. Overall happy with truck.Sorry I asked...
\blew head gasket in 3800
swapped in salvage 3800 s/c
wiped out trans in 200 miles
rebuilt trans
motor wiped rod after 200 more.
overkill rebuild almost complete.
Overkill rebuild... I love it. If some is good, and more is better, then too much must be just right.
Lol,overkill but no horsepower.
Stock cam and stock pulley,but coated crank,rods,pistons,heads,intake,SC,springs,valves, pump etc..
Also building one for my fiero,tgp 3.1 bottom end with 3400 top end.
Top end coated,bottom end mostly stock except cam.
Just gotta pick up the valves and the L67 is almost done.
Bookmarks